FUSION by GLP’s Exo Beam is a powerful IP65 rated moving head with a beam angle of just 0.1°, generating a sharp beam that can be seen for long distances. The Exo Beam features a single, powerful and highly efficient 90W, 7500K white light LED engine. With its’ 160mm front lens, the fixture features an incredible 0.1° beam angle and a field angle of just 1° along with incredibly fast pan and tilt movements, combining to give incredible mid air effects – either indoor, or out. The powerful beam fixture comes equipped with a range of additional effects, including two independent rotating prisms that can be used individually, or combined together for stunning aerial effects; a hybrid gobo wheel with both static and rotating gobos; a color wheel with 14 colors; as well as motorized focus, variable speed shutter and 16 bit pan and tilt movement. The versatile fixture can operate anywhere in the world, and in any orientation with wireless DMX control available as an optional extra. With a robust die cast housing which combined with the IP65 rating make the Exo Beam ready for even the worst of outdoor conditions. Control DMX 512 protocol 4 button OLED display Power Auto sensing 100-240 VAC / 50-60Hz Neutrik TRUE1 in and out 185 Watt (max.) Thermal Specifications Max. ambient temperature 113°F (45°C) Min. ambient temperature -4°F (-20°C) Connectors XLR 5-pin signal connection Neutrik TRUE1 power input Mounting Options 2 pairs of 1/4 turn locks Safety wire attachment point Built in rubber feet Operates in any orientation Dimensions L x W x H 13.9″ x 14.9″ x 20.6″ 35.4 cm x 37.9 cm x 52.4 cm Light Source 1x 90W White LED, rated at 7500K 50,000 lifetime hours Optical System 0.1° beam angle 1° field angle Multiple dimmer curves Effects Magnetic head mounts Anti-fog system Single color wheel with 14 fixed colors, plus open Single ‘Hybrid’ gobo wheel with rotating and fixed gobos 2 Prisms – 6 way linear and 8 way radial. Prisms can be added individually, or combined together for greater effects Continuous, variable dimming Motorized focus Variable speed shutter 16 bit pan (630°) / tilt (267°) movement, with position feedback
The impression X4 L offers a full package of a pixel mapping LED luminaire with front beam rotation, a fast 7:1 zoom range, wide color pallet and high output from its 37 LED sources which are each rated at 15 Watts and feature RGBW color technology. The impression X4 L also offers smooth full range dimming, electronic strobe functionality, variable color temperature correction, 16 bit pan and tilt control, all in the sleek baseless design that has become a part of the GLP impression product range. Technical data LED-Source LED-Type: Osram Ostar Lifetime (Hours): 50.000 LED count: 37 LED Colors: RGBW Optical system minimum Zoom (Deg): 7 maximum Zoom (Deg.): 50 Beamshape: motorized Movement Resolution: 8 - 16 Bit Position Feedback: yes Pan (Degrees): 660° Tilt (Degrees): 250° Control Control Modes Normal Compressed HighRes Pixel-Mapping Display illuminated graphic LCD Self charging buffer battery backlit buttons Protocol USITT DMX-512 RDM RDM Bidirectional communication Cooling temperature controlled overheating protection Effects Dimmer: 0-100% electronic Shutter: max. 25 Hz Color temperature filter electronic 2.500 K - 10.000 K Internal Effects LED Macro Effects Color presets Connectors Signal connection XLR 5-Pin In/Out Power Input: Neutrik PowerCON Operating Condtions Mains voltage: 100-240 VAC / 50-60Hz Power (Watt @ 230V): 900 Fuse: 20mm T 12A Maximum ambient temperature: 45°C / 115°F Operating Position: any EEC: E EEI: 1,269 Ec (kWh/1.000h): 755 Mounting Options Standing: Removable baseplate with brackets for ratchet belt Hanging (horizontal): adjustable bar for sideways truss installation (optional) Hanging (vertical): M10 socket for half coupler, or other clamp Safety wire attachment: 2 eyelets Dimensions & Weight Length: 430 mm / 16,9 in Width: 185 mm / 7,3 in Height (head vertical): 530 mm / 20,9 in Weight: 17 kg / 37,5 l
When you look for a strobe, you look for power and the JDC1 from GLP delivers power in excess through a versatile and highly creative design, the likes of which has never been seen before. The JDC1 contains a traditional single tube element with an incredible clear, bright white output and combines that with a surrounding full face of RGB LED power, utilizing 1,440 high quality LED’s. The possibilities are endless as these two elements have independent control and can be used as separate pieces, or combined for stunning effects. Along with working as a powerful strobe light, both the tube and the full face sections can be run continuously for high output blinder and wash light effects, which never reduce output or have thermal cutouts. To give even more functionality, the RGB face can be divided into 12 separate ‘pixel’ sections, and additionally the bright white tube also can be divided into 12 sections and then the whole array can be fully pixel mapped through any standard controller. The JDC1 also features dynamic movement with a 16 bit, 190° tilt range, allowing you to place effects exactly where and when you want them to be – and get the most possible power and impact. The JDC1 is a whole new class of strobe that offers an incomparable feature set that goes way beyond the definition of a hybrid. The JDC1 is hybrid redefined. Technical data Strobe Panel LEDs LED Type Osram LRTB GVTG LED Count 1320 LED Colors RGB LED Segments 12 (2 x 6) Strobe Tube LEDs LED Type CREE XP L LED LED Count 216 LED Colors Cool White LED Segments 12 Movement Resolution 8 - 16 Bit Position Feedback yes Tilt (Degrees) 189° Connectors Signal connection XLR 5-pin input & output Power Input Neutrik powerCON TRUE1 input Operating Condtions Mains voltage 100-240 VAC / 50-60Hz Power (Watt @ 230V) 1200 Fuse 20mm T 8A Maximum ambient temperature 40°C / 104°F Operating Position any Shipping Single fixture cardboard Tourpack 4-way inkl. Flightcase Dimensions & Weight Length 150 mm / 5.9 in Width 390 mm / 15.3 in Height (head vertical) 251 mm / 9.8 in Weight 11,6 kg / 25.6 l
The impression X4 Bar 10 is a high performance batten that incorporate 15 Watt RGBW LEDs packed tightly to give a full line of light. The X4 Bar 10 uses 10 LEDs. High quality optics ensure a smooth, homogenized output across the batten through a broad pallet of pastel and saturated colors, complimented by GLP’s exceptional dimming which ensures that there is no color shift, just smooth even fades. DMX control offers full pixel mapping capabilities, whilst both units feature a 7:1 zoom ranging from 7 to 50 degrees, giving effects from a narrow angle light curtain to a wide angle washlight. The X4 Bar also features a motorized tilt, for fast refocussing or to be used to add more dynamics to the output beam. Multiple X4 Bar units can be aligned, and maintain consistent pixel spacing between adjacent units. Technical data LED-Source LED-Type Osram Ostar Lifetime (Hours) 50.000 LED count 20 LED Colors RGBW Optical system minimum Zoom (Deg) 7 maximum Zoom (Deg.) 50 Movement Resolution 8 - 16 Bit Position Feedback yes Tilt (Degrees) 210° Control Control Modes Compressed HighRes Pixel-Mapping Display illuminated graphic LCD Self charging buffer battery Protocol DMX-512 RDM RDM Bidirectional communication Cooling temperature controlled overheating protection Effects Dimmer 0-100% electronic Shutter Max. 10 Hz electronically Internal Effects LED Macro Effects Color presets Connectors Signal connection XLR 5-pin input & output Power Input Neutrik PowerCon input & output Operating Condtions Mains voltage 100-240 VAC / 50-60Hz Power (Watt @ 230V) 550 W Fuse 20mm T 8A Maximum ambient temperature 45°C / 115°F Operating Position any Mounting Options Standing Rubber feet Hanging (horizontal) adjustable bar for sideways truss installation (optional) Hanging (vertical) Omegabrackets Safety wire attachment foldout eyelets Shipping Single fixture cardboard Tourpack 4-way incl. Flight Case and Half Coupler Housing Colors Standard colors black Optional Special colors on request Dimensions & Weight Length 100 mm / 3.9 in Width 1000 mm / 39.4 in Height (head vertical) 240 mm / 9.4 in Weight 16 kg / 35.3 l
The GLP impression X4 Bar 20 is a high performance batten offering flexibility to today’s lighting designer across multiple applications. The GLP impression X4 Bar uses high output RGBW LED’s that are packed tightly to give a full batten of light, with 20 LED’s used in the 40 inch long X4 Bar 20. High quality optics ensure a smooth, homogenized output across the batten through a broad pallet of pastel and saturated colors. This allows for subtle graduated fades, or for distinct color breaks between LED’s. This is complimented by GLP’s exceptional dimming which ensures that there is no color shift, just smooth even fades. DMX control offers full pixel mapping capabilities, allowing a whole multitude of dynamic fades and chases through intensities and colors. The X4 Bar 20 features a 7:1 zoom ranging from 7 to 50 degrees, giving effects from a narrow angle light curtain to a wide angle backlight or washlight. The X4 Bar also features a motorized tilt, for fast refocussing or to be used to add more dynamics to the output beam. The X4 Bar has been specifically designed to give consistent pixel spacing between adjacent units, an important visual aspect for many designers using fixtures in view of the audience. The X4 Bar is complemented by Powercon in and thru connectors for easy daisy chaining without the need for an external PSU, multiple DMX modes, rubber feet for floor mounting and ¼ turn attachments points for rigging flexibility.