Rental Catalog

Main Light's Rental Department serves all of the professional lighting industry.
We have grown into one of the largest rental houses in the United States.
Our equipment is clean, well maintained, and reliable. We will do our best to serve you.

View equipment by Manufacturer

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

  • 1 Week $38.00
  • 2 Weeks $70.00
  • 4 Weeks $120.00
  • More details...

    The AF-1 features DMX as standard and can be installed from the ceiling, in the truss, or can be floor standing. FEATURES 1600 cubic m/hr Analogue link sockets Converts smoke to haze, Wind effects Fan speed 0 – 2500 rpm Floor standing or truss mounting Keeps equipment cool: Amp racks, Dimmer racks Low voltage multifunctional Remote control Projects smoke down long lengths of ducting Sealed fan motor Single channel DMX operatio

  • 1 Week $43.00
  • 2 Weeks $81.00
  • 4 Weeks $146.00
  • More details...

    The Atomic 3000 DMX is a powerful, high-impact strobe with 3000 watts of unlimited energy. Like nature’s most powerful energy source, the Atomic 3000 DMX is an ultra-bright, high-impact strobe that supplies an explosive pulse of energy to clubs, tours and mobile DJ’s of any size. The Atomic is dimmable from 0-100%. Flash duration is controllable and for ultimate flexibility and variety of effect, variable adjustment of flash rate (20ms to 2 seconds) and flash intensity is possible. The Atomic 3000 DMX is both intense and intelligent. DMX controllable, it employs a smart, integrated heat control that eliminates the need for cool down time. 3000 W strobe. 5600 K color temperature. Continuous blinder effect with auto fade. Smart integrated heat control eliminates cool down time. Variable flash duration, intensity & rate. Preprogrammed special effects.  Fan Cooling.  Auto-ranging power supply (90-260 V, 50/60 Hz).  Long-life Xenon lamp included.  DMX or stand-alone mode.

  • 1 Week $43.00
  • 2 Weeks $81.00
  • 4 Weeks $146.00
  • More details...

    Atomic Colors is a specially designed head which fits onto the front of the Atomic 3000 DMX - allowing up to ten brightly colored strobe and blinder effects.   1 gel string included with 10 colors plus clear Quiet fan cooling Multiple modes, e.g. gel saver mode, action mode and monitor mode Safety wire MPU-02 or MPU-08 for powering either 2 or 8 Atomic Colors On board memory with monitor and resetting DMX control DMX address via display

  • 1 Week $275.00
  • 2 Weeks $550.00
  • 4 Weeks $1100.00
  • More details...

    The EC-20 is a new generation LED panel that is brighter, lighter and faster! Built to the highest standards, the EC-20 is designed for those who place value on solid, dependable performance and superior image quality. By combining the image quality and precision of conventional high resolution screens with the creativity and low weight of mesh type screens, the EC-20 provides new design possibilities for all manner of indoor and outdoor staging, as well as permanent installations. Features Outstanding image quality and elegant, cable-free design 20 mm pixel pitch, semi-transparent design Flexible - integrated curving and full integration with lighting control Lightweight, yet strong Fast to assemble, no tools, no cables Powerful P3 system processor, easy setup procedure Reliable, built to the highest standard

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    Ether2DMX8 is a highly capable DMX router and much more! As a DMX router, it translates Artnet protocol into DMX in/out universes but can also be used as a DMX merger, DMX splitter hub, fail safe device, cue playback, and DMX viewer monitor. As an extension for the M1 console it provides 8 additional DMX ports and includes the required DMX license. When connected to a standalone PC, the Ether2DMX8 also becomes the license key for M-PC and provides 8 DMX Universes.   Artnet to DMX conversion DMX to Artnet conversion 10 Factory Presets 10 User Presets 99 Cues with Fade Time, Hold Time and Cue Linking 8 Switch Inputs 8 XLR female 5pins DMX Monitor DMX and Artnet Test Generator Multiple Artnet IP in for backup system USB port for backup and firmware updates M1 Extension with 8x DMX512 M-PC License with 8x DMX512

  • 1 Week $44.00
  • 2 Weeks $83.00
  • 4 Weeks $149.00
  • More details...

    The FiberSource QFX150 is a versatile source for any fiber installation. This DMX controllable fixture features a color wheel with 9 interchangeable colors and smooth, full range mechanical dimmer. A full range of up to 40 different colors is available for extra flexibility. Other features include a shutter and variable strobe on the dimmer wheel. Furthermore a twinkle wheel creates sparkling effects for star ceiling and star drop installations. The FiberSource QFX150 has an extended control in stand alone mode. Via the dipswitches, virtually any combination of colors, color speed and twinkle speed is programmable. No external controller is required. Accepts up to 300 flexible 1,0 mm (900 pieces 0,75 mm) fibers, either side or end emitting. Color wheel with up to 9 interchangeable colors (4 are included). Full range mechanical dimmer. Blackout and Strobe functionality. Twinkle wheel for sparkling effects. 6000 hour 150W lamp included produces a bright white light source. DMX controllable or full stand alone control.

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    This specially formulated economy mix is perfect for medium density, airborne fog effects. It is particularly well suited for the Magnum 550 and 800.

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    A longer lasting, higher density fog is sometimes required in a more controlled environment. With its longer “hang time”, C3 Mix is ideal for “waterfall” and “curtain” type effects.

  • 1 Week $785.00
  • 2 Weeks $1490.00
  • 4 Weeks $2670.00
  • More details...

    The LC Plus is a semi-transparent, modular system of LED panels, perfect for displaying video and images. Designed for stage shows, TV studios and other commercial applications, the LC Plus closely integrates light, video and set design, offering entirely new possibilities for staging. A true IP65 protection rating, wide operating temperature range and high level of brightness enable the LC Plus to be used in most outdoor applications. A low weight and high degree of transparency enable use in applications that simply are not possible with conventional LED screens. 40 mm pixel pitch (seamless image at about 30m) Bright, 3000 Nit (calibrated) 60% transparency Pixel level color calibration for superb color and brightness uniformity Scaling and de-interlacing Silent (no fans) Fast and easy setup Ethernet based signal distribution, up to 50 panels in daisy chain Designed for outdoor and indoor use, IP65 protection rating All-in-one solution DMX controlled image manipulation in real-time Supports multiple video protocols Semi-transparent video One truly innovative aspect of the LC series is its transparency. With LEDs encased in clear acrylic tubes, the screens are 60% transparent and allow light, air and effects to pass through them. This opens up a whole new set of possibilities for lighting and stage designers. Dim the panels and they seem to ‘disappear’, revealing objects or performers placed upstage. Light can be projected from behind and smoke effects made to emerge through the screens. In architectural applications video walls can be placed behind windows to allow sunlight into interior spaces. Brightness The LC is an extremely bright video source. With an output of 1800 NITs (cd/m2), the LC is clearly visible in daylight, making it suitable for large-scale and outdoor productions. Resolution With a 40 mm pixel pitch, the LC offers excellent resolution without compromising on its light weight and transparency. A video wall’s resolution is determined by its pixel pitch. High resolution screens have a fine pixel pitch: typically around 6 mm. Low resolution screens can go up to 100mm. The LC has an ideal balance at 40mm, which means it remains lightweight, transparent and relatively inexpensive but is still tight enough to offer excellent image quality. Viewing distance The LC portrays seamless images at thirty meters and beyond. Although still a useful effect at shorter distances, a simple rule of thumb is that in order to see an unpixelated image on an LED video screen, you need to be at a viewing distance of 750 times the pixel pitch. LC panels present a seamless image at about 30m (750 x 40mm = 30m) or 100 ft. Wide viewing angle Another important feature of the LC has to do with the pixel design. While most LED screens use triangular configurations, the LC comes with elliptical pixels. This offers a very wide, 100° viewing angle, a feature that is especially valuable for applications where you can cover not only the front but also the sides where people tend to miss out. Genlock The LC’s Genlock feature makes it ideal for TV and video applications. A DVI buffer box is available for the panels as a separate item. Simple logistics LC units are built tough for the road and smart for easy set-up. With no external drive or power boxes, each unit comes with everything built in - substantially reducing the weight and costs of shipping as well as the set-up time. Simple mounting system You can easily stack or hang the LC Series. With standard Prolyte CCS6 conical truss connectors, connecting the lightweight units together is simple and the resulting structure is very sturdy. Cabling Data and power can be daisy chained between frames with standard DVI and PowerCon cables so you don’t have to run a separate cable to each frame from a control box. A maximum of five LC 2140 panels or ten LC 1140 panels may be connected together at 230 V, and up to 6 frames via standard DVI-D cables on one link. Worldwide compatibility Each unit contains a switch mode power supply that covers all worldwide voltages, so you are always ready to go - anywhere in the world. Shipping The lightweight units can be packed four frames to a flight case, which means fewer flight cases and a reduction in shipping cost.

  • 1 Week $500.00
  • 2 Weeks $950.00
  • 4 Weeks $1700.00
  • More details...

    The LC Series is a semi-transparent, modular system of LED panels, perfect for displaying video and images. Designed for stage shows, TV studios and other commercial applications, the LC closely integrates light, video and set design, offering entirely new possibilities for staging. Semi-transparent video One truly innovative aspect of the LC series is its transparency. With LEDs encased in clear acrylic tubes, the screens are 60% transparent and allow light, air and effects to pass through them. This opens up a whole new set of possibilities for lighting and stage designers. Dim the panels and they seem to ‘disappear’, revealing objects or performers placed upstage. Light can be projected from behind and smoke effects made to emerge through the screens. In architectural applications video walls can be placed behind windows to allow sunlight into interior spaces. Brightness The LC is an extremely bright video source. With an output of 1800 NITs (cd/m2), the LC is clearly visible in daylight, making it suitable for large-scale and outdoor productions. Resolution With a 40 mm pixel pitch, the LC offers excellent resolution without compromising on its light weight and transparency. A video wall’s resolution is determined by its pixel pitch. High resolution screens have a fine pixel pitch: typically around 6 mm. Low resolution screens can go up to 100mm. The LC has an ideal balance at 40mm, which means it remains lightweight, transparent and relatively inexpensive but is still tight enough to offer excellent image quality. Viewing distance The LC portrays seamless images at thirty meters and beyond. Although still a useful effect at shorter distances, a simple rule of thumb is that in order to see an unpixelated image on an LED video screen, you need to be at a viewing distance of 750 times the pixel pitch. LC panels present a seamless image at about 30m (750 x 40mm = 30m) or 100 ft. Wide viewing angle Another important feature of the LC has to do with the pixel design. While most LED screens use triangular configurations, the LC comes with elliptical pixels. This offers a very wide, 100° viewing angle, a feature that is especially valuable for applications where you can cover not only the front but also the sides where people tend to miss out. Genlock The LC’s Genlock feature makes it ideal for TV and video applications. A DVI buffer box is available for the panels as a separate item. Simple logistics LC units are built tough for the road and smart for easy set-up. With no external drive or power boxes, each unit comes with everything built in - substantially reducing the weight and costs of shipping as well as the set-up time. Simple mounting system You can easily stack or hang the LC Series. With standard Prolyte CCS6 conical truss connectors, connecting the lightweight units together is simple and the resulting structure is very sturdy. Cabling Data and power can be daisy chained between frames with standard DVI and PowerCon cables so you don’t have to run a separate cable to each frame from a control box. A maximum of five LC 2140 panels or ten LC 1140 panels may be connected together at 230 V, and up to 6 frames via standard DVI-D cables on one link. Worldwide compatibility Each unit contains a switch mode power supply that covers all worldwide voltages, so you are always ready to go - anywhere in the world. Shipping The lightweight units can be packed four frames to a flight case, which means fewer flight cases and a reduction in shipping cost.

  • 1 Week $49.00
  • 2 Weeks $91.00
  • 4 Weeks $160.00
  • More details...

    The perfect controller for the club and mobile DJ market. This Windows based controller is very easy to use, with an intuitive user interface. LightJockey 2 incorporates a host of useful upgrades that make this Windows-based controller an even more flexible and easy to use lighting tool. With upgraded features like a new PCI card for increased PC interface capabilities (also USB and PCMCIA interface options), LightJockey 2.0 is an advancement on Martin´s industry standard LightJockey controller. Windows 2000 compatible, other new features include a Solid Beam Virtual Visualizer, a high quality visualization simulator capable of creating realistic, solid, 3D beams. Visually accurate and easy to understand, the simulator allows you to create virtual visualizations off-site. For more flexible music capabilities, LightJockey 2.0 interfaces with WinampTM* to play a multitude of digital audio files including MP3. LightJockey 2.0 includes audio CD ROM capability as well. It also supports SMPTE and MIDI timecode with suitable interface. And a new show-saver backup feature ensures that your shows won’t be lost. Extremely powerful, LightJockey 2.0 includes all the original features that have made the LightJockey the choice of lighting professionals in the Club, Mobile DJ, Touring and Special Events markets: large fixture library, user friendly graphic functionality, advanced shape generator for fast and intuitive automated movement programming, as well as all the benefits of the Windows environment such as resizing of windows and drag and drop technology. Devoted to designing the very best lighting control systems on the market, Martin’s LightJockey 2.0 offers lighting designers increased flexibility, spontaneity and ease of use in a user-focused control package. Windows 2000, Win ME, Win 98-95 based controller. Large fixture library and user configurable editor. Solid beam virtual visualizer for programming shows off-site. Supports MP3, audio CD, SMPTE and MIDI timecode. PCI, USB, PCMCIA interface options. Control of up to 100 fixtures, 2048 DMX channels. Integration with 2532 and 2518 for more direct access. Graphical representation of all fixture functions.

  • 1 Week $406.00
  • 2 Weeks $773.00
  • 4 Weeks $1381.00
  • More details...

    M2PC is the complementary control surface to Martin’s M-PC controller software. Featuring the same layout and portable size as the M2GO, the M2PC delivers a professional level of features directly from any PC. Following the philosophy and simplicity of our current controller platform, such as the Martin M1, the Martin M2PC is one of the most powerful and affordable PC-based lighting controllers on the market.   Features USB 2.0 Connection to Windows PC 3.5” touchscreen for fast and direct parameter access 4 digital encoders for parameters 8 customizable function keys 2 DMX ports standard; 2 additional internal DMX ports can be added as options Standard license for 4 Universes - up to 64 Universes with optional expansion license pack Controls up to 32768 parameters Customizable Graphical User Interface with context sensitive toolbars and integrated Help menu Powerful effects engine 1000 cuelists with fader control 1000 cuelists with playback control buttons Parallel execution of multiple cuelists Submaster, Groupmaster and Override functionality Parameter and Time-fanning functionality Auto update for presets and cues On-the-fly global timing adjustments Mx Manager Software for programming and triggering via time and calendar schedules Multiple wing attachment (MaxModules) Physical Length: 300 mm (11.8 in.) Width: 540 mm (21.3 in.) Height: 99 mm (3.9 in.) Weight: 4.6 kg (10.1 lbs.) Control and Programming Protocol: DMX512A (RDM), Artnet2 4 DMX universes, expandable to 64 2048 channels, expandable to 32768 No limit to number of DMX channels per fixture Extensive fixture library for all known manufacturers 65000 presets for each group of functions (P/T, color, gobo, etc.) Effect generator for automated programming of complex effects Customizable highlight and lowlight function to identify individual fixtures Relative or absolute programming Fan function for all channels (including timing parameters) On-the-fly global timing changes Virtual cuelists Macros Wait, follow and link cues HTP, LTP, chase, timecode, submaster and group master playback functionality Individual parameter timings Intuitive patch feature Fixture type cloning All channels with 16-bit resolution Control/User Interface Main playback interface: Ten 60 mm (2.4 in.) playback faders, each with four function-assignable buttons Eight customizable multi-function keys Playback Select button Master Go section with Go, Pause, Snap and Release Four digital rotary encoders with push function and status LED for fixture parameter control 3.5” touch screen for parameter groups, effect parameters, fanning and global timings Grand master rotary fader and button Blind/preview button Customizable highlight/lowlight function Customizable parameter defaults Next/last fixtures/groups Large command keys Playback Assign a cue, cuelist or effect to any playback fader 100 playback banks, each containing 10 playbacks 100 pages of 100 playbacks activated by touch screen button No limit to cues per cuelist Full 16-bit fading for high-resolution fixtures Individual fade in/fade out times for all playbacks Manual override available at all times Live 0-1000% override of global cue timings Live programmer timing (“Sneak”) Cuelists can be executed in tracking or non-tracking mode Software Uses Martin M-PC software on any Windows XP, Windows 7 (32 or 64-bit) PC Connections 2 x DMX universe outputs: 5-pin locking XLR Additional 2 x internal DMX universe outputs: 5-pin locking XLR (optional) Ready to receive internal MIDI module and SMPTE timecode module Internal MIDI in/out/thru (MIDI show control, MIDI notes, MIDI timecode): Optional Internal SMPTE Timecode In/Out: 3-pin XLR (optional) 12 VDC power supply input: 4-pin XLR Desk lamp: XLR Electrical AC mains power to 12 VDC external PSU (included): 100-240 V nominal, 50/60 Hz Maximum current: 1.4 A 12 VDC output: 5 A, 60 W max.

  • 1 Week $65.00
  • 2 Weeks $125.00
  • 4 Weeks $245.00
  • More details...

    The MAC 101 is a remarkably small, super light and simple LED moving head wash light. It features a tight and very bright beam, rapid movement and calibrated colors with a low price tag that allows for revolutionary set, stage and decorative lighting designs. Highly efficient LEDs with true color calibration Variable CTC 2200 lm output 13.5° one-tenth peak angle Smooth electronic dimming: 0 - 100% Wide angle options Electronic strobe with pulse and random effects Martin’s fastest moving head High efficiency, low power consumption Ultra-compact, low weight design (3.7 kg) Power easily daisy-chained

  • 1 Week $281.00
  • 2 Weeks $531.00
  • 4 Weeks $956.00
  • More details...

    The MAC 2000 Wash XB is the market’s most advanced wash light with extremely high output (over 60000 lumens). Based on a proven design and housing that is more compact than any of its competitors, this highly reliable wash light is established as industry standard.     1500 W short arc discharge Total output up to 63100 lumens CMY color mixing system 2 x 4 position color wheels plus open Variable CTC Motorized zoom PC,Fresnel and micro-Fresnel (all included) and super-wide lenses Mechanical dimming Strobe effect up to 10 Hz, pulse effects, instant open and blackout Pan and tilt range of 540°/267° Variable fan control for quieter operation Electronic ballast with hot lamp restrike and flicker free light

  • 1 Week $119.00
  • 2 Weeks $213.00
  • 4 Weeks $406.00
  • More details...

    The MAC 250 Entour includes all the features of the MAC 250 Krypton plus a number of added features, including a new achromatic lens system and additional gobo wheel. The enhanced optical system produces unsurpassed quality imaging, which together with the added array of graphical effects, make the Entour an even more powerful lighting tool. It features a specially designed dimming system for exceptionally smooth and even dimming. By achieving new standards in light output and image quality, the Entour is ideal for environments where powerful effects are required like stage, studio and event applications, permanent installations and much more. Optics In the MAC 250 Entour, a new 17-degree achromatic lens system produces razor sharp picture quality. A narrow angle 14-degree lens is also included with the Entour for longer projection throws. A full range dimmer/shutter is very fast and allows for smooth color and effect transitions through easy variation of the light intensity. Strobe effects are possible up to 20 Hz. New graphical capabilities For completely fresh graphical looks, a newly designed rotating and indexing gobo wheel offers a new selection of replaceable metal and dichroic gobos. The 16-bit precision gobo wheel houses 7 slots plus open. Gobo changes are fast and easy. The Entour houses an additional fixed gobo wheel with 10 replaceable metal gobos giving lighting professionals an even wider range of graphical effects possibilities. Also included with the Entour are a series of beam reduction gobos for easy adjustment of beam size. Color Rich color shades are provided from a motorized color wheel housing 12 dichroic color filters plus open with split position possibilities. All color filters are replaceable, and with a wide variety of optional colors available, designers can customize the color palette to fit their needs. Modular design The MAC 2000 inspired modular housing is not only good looking; it is designed to make service and maintenance simple with fast access to modules and critical components. The Entour comes in black, white or titanium finish. Dimmer/Shutter The Entour features an enhanced high-resolution dimming system similar to the MAC 2000 that provides exceptionally smooth and even dimming. Strobe effects are possible up to 20 Hz. Prism and focus A bi-directional, 3-facet prism is smooth and rotates at variable speeds, adding unique effects to gobo projection. The prism can also be replaced giving lighting professionals an added customizable feature. The unit is also equipped with a remote focus for additional effect possibilities, as well as various preset patterns for valuable programming timesavings. Martin’s fastest moving head ever The latest in pan and tilt motor technology produces both smooth and ultra-rapid movement, making the new MAC 250 fixtures the fastest moving heads that Martin has ever produced. Movement range is 540° of pan x 257° of tilt. If knocked out of position, a high-speed, automatic reset function realigns the fixture in seconds. The Entour includes two additional features: an easily accessible, multi-position tilt lock eases handling when moved on a frequent basis, and a convenient, low noise operation mode is included for noise sensitive studio environments. Communications The MAC 250 Entour is equipped with 3 and 5 pin XLR IN/OUT connectors for data and prepared for future new standards such as ACN or Ethernet based protocol. Also on board is a new light sensitive yellow LED display for easy fixture programming, and customized settings allow each user to cater the fixture to their liking. The display provides easy to use maintenance menus and concise error messages. A convenient, easily switchable power supply covers worldwide voltages and frequencies.

  • 1 Week $580.00
  • 2 Weeks $1117.00
  • 4 Weeks $2150.00
  • More details...

    The MAC III Performance is a high-output profile moving head with a new interleaved framing system with full crossover of each blade and industry-first continuous rotation for new and unlimited projection, framing and effects possibilities. It is available as a stand-alone fixture or as an easy-to-swap module that installs in minutes on any MAC III Profile™.   1500 W short arc discharge lamp with Lok-it!™ base CMY color mixing system 7-position color wheel plus open Variable CTO 5 indexable rotating gobos Framing of focused gobo Uniform dimming plus mechanical shutter for total blackout 1:5 zoom with focus tracking Gobo animation wheel with full movement / direction control Continuous rotation, full blade crossover framing with uniform focus of each blade Motorized iris Mechanical and electronic strobe effect 2 - 10 Hz, pulse effects, instant open and blackout Patented very low-noise cooling. Quietest fixture in its class Modular design for easy maintenance, servicing and product conversion Easy conversion between a profile and performance - no need to invest in two separate fixtures Electronic ballast, fast lamp re-strike and flicker free light Pan and tilt (540°/267°) with absolute positioning control RDM ready, service USB and Art-Net II prepared Battery powered TFT display and jog wheel navigatio

  • 1 Week $425.00
  • 2 Weeks $807.50
  • 4 Weeks $1530.00
  • More details...

    The MAC III Profile offers a perfect balance between a superior feature list and ultimate performance. This high-output profile combines advanced 1500 watt lamp technology with superb optical efficiency, an innovative design and great feel to take moving head performance to a higher level.   1500 W short arc discharge lamp with Lok-it!™ base CMY plus variable CTO with non-fade coating technology 7 position color wheel plus open 2 x 5 indexable rotating gobos plus open 1:5 zoom with focus tracking Completely uniform dimming plus mechanical shutter for total blackout Interchangeable 4-facet rotating and indexable prism Motorized iris Mechanical and electronic strobe effect 2 - 10 Hz, pulse effects, instant open and blackout Gobo animation wheel with full movement / direction control Pan and tilt (540°/267°) with absolute positioning control Patented very low-noise cooling. Quietest fixture in its class Modular design for easy maintenance, servicing and product conversion Electronic ballast, fast lamp re-strike and flicker free light RDM ready, service USB and Art-Net II prepared Battery powered TFT display and jog wheel navigation Easy conversion between a profile and performance - no need to invest in two separate fixture

  • 1 Week $75.00
  • 2 Weeks $135.00
  • 4 Weeks $255.00
  • More details...

    The MAC 300 is an automated moving head washlight luminaire with an elegant contemporary design, a compact version of the successful MAC 600. This flexible atmosphere generator produces a wide variety of colors and effects and it is used wherever dynamic color wash is important – both indoor and out. The MAC 300 fits discreetly in a ceiling or truss yet it is powerful enough to cut through even high ambient light levels. The MAC 300 has proven to be well suited to a wide range of lighting applications. A CMY color mixing system provides nearly unlimited color choices. A separate 6 slot plus open color wheel offers additional color possibilities. All slots are replaceable and split colors are possible. CTC and UV filters are also included. A full range dimmer and fast 14 Hz shutter for strobe effect are standard. Preprogrammed macro sequences, for example a dimmer or strobe pulse, can be called up for automatic and quick programming. Zoom effect possibilities are provided by a variable frost filter. Smooth continuous transition from a standard wash to zoom effect creates the same zoom possibilities as conventional 1 and 2K-watt lights. The head of the MAC 300 pans 540° with a tilt of 265° at two different P/T speeds and works in all possible orientations. A simple change of the front lens makes narrow and wide beam angles possible. The standard 18° lens produces a focus range of 18-35°. The 59° diffuser lens creates a focus range of 59-67°. The compact shell of the MAC 300 is easy to detach. Modular construction makes components easily accessible and a snap to remove. Furthermore dedicated anchoring points, a safety wire attachment point, a quarter-turn fastening system and a mid-pan-range locater make for trouble free rigging. Two separate Omega adapters and two different clamp types are available. A 4 digit LED readout allows the user to customize settings for easy programming. Error messages are easily understood, lamp and fixture usage is displayed and the readout flips for easy reading in any position. The MAC 300 employs a 250-watt discharge lamp producing a luminous flux of 4800 lumens.

  • 1 Week $210.00
  • 2 Weeks $394.00
  • 4 Weeks $744.00
  • More details...

    The MAC 401 RGB Zoom is a creatively fresh and versatile LED moving head wash light with an innovative design that gives it flexible  functionality,  The MAC 401's advanced wash characteristics combine with a host of other useful features like fast zoom and individual LED segment control to add a new and inventive element to touring and rental applications, TV shows, corporate events, night-time venues and leisure environments.   Features Very bright - over 6600 lumens of output 36 lenses in four individually controllable groups Broad beam look with speedy zoom Built-in macro effects Low noise operation Extremely energy efficient Double washlight, beam reflective mirror, upcoming options Accessory gel frame holder RGB and Hue/Saturation control modes Physical Length: 221 mm (8.7 in.) Width: 505 mm (19.9 in.) Height: 527 mm (20.7 in.) Weight: 21 kg (46.3 lbs.) incl. 2 head modules, excl. brackets Dynamic Effects Color mixing: RGB or HSV Red or hue: 0 - 100% Green or saturation: 0 - 100% Blue or value: 0 - 100% Color temperature control: Variable 10 000 - 2000 K Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color Pre-programmed effects: Two superimposable chase/pulse/flip/flicker/strobe/static effects with variable intensity, x-fading and 'pixel wheel' rotation speed Strobe effect: Electronic, with pulse and random effects Electronic dimming: 0 - 100%, four dimming curve options Zoom: 16° in Hypermode, 20° - 50° Pan: 630° with two speed settings Tilt: 300° with two speed settings Control and Programming Control: DMX Color control modes: RGB + CTC (raw and calibrated), HSV DMX channels: 13/17/21/25/33 depending on control mode & pixel grouping Setting and addressing: Control panel with LED display Protocol: USITT DMX512/1990 Transceiver: RS-485 Optics Light source: 36 Osram multi-color LED high power emitters LED refresh rate: 887 Hz Construction Color: Black Housing: High-impact flame-retardant thermoplastic and die-cast aluminum Protection rating: IP20 Installation Mounting points: 2 pairs of 1/4-turn locks Orientation: Any Minimum distance to combustible materials: 200 mm (7.9 in.) Minimum distance to illuminated surfaces: 200 mm (7.9 in.) Minimum distance to persons and objects in beam zone: 1 m (3.3 ft.) Connections AC power input: Neutrik PowerCon DMX data in/out: 5-pin locking XLR, RJ-45 Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Main fuses: 10 AT (slow blow) x 2 Typical Power and Current Only RGB Zoom module installed (standard configuration) 100 V, 50 Hz: 367 W, 3.7 A, PF 0.995 100 V, 60 Hz: 367 W, 3.7 A, PF 0.995 110 V, 60 Hz: 364 W, 3.3 A, PF 0.994 120 V, 60 Hz: 367 W, 3.1 A, PF 0.993 208 V, 60 Hz: 360 W, 1.8 A, PF 0.967 230 V, 50 Hz: 360 W, 1.7 A, PF 0.973 240 V, 50 Hz: 360 W, 1.6 A, PF 0.969 RGB Zoom and optional CT Zoom modules installed 100 V, 50 Hz: 770 W, 7.8 A, PF 0.996 100 V, 60 Hz: 765 W, 7.8 A, PF 0.997 110 V, 60 Hz: 755 W, 7.0 A, PF 0.995 120 V, 60 Hz: 749 W, 6.3 A, PF 0.993 208 V, 60 Hz: 732 W, 3.6 A, PF 0.980 230 V, 50 Hz: 731 W, 3.3 A, PF 0.965 240 V, 50 Hz: 730 W, 3.2 A, PF 0.955 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor Thermal Cooling: Filtered forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state: 80° C (176° F) Total heat dissipation (calculated, +/- 10%), one module installed: 1250 BTU/hr. Total heat dissipation (calculated, +/- 10%), two modules installed: 2630 BTU/hr.

  • 1 Week $219.00
  • 2 Weeks $415.00
  • 4 Weeks $719.00
  • More details...

    When looking at the MAC 700 Profile you might find it hard to fully comprehend just how Martin has placed so many features and so much power into a sleek moving head this compact and light. But a compact, light, fixture with power and optical precision beyond its peers is exactly what Martin set out to achieve in the MAC 700 Profile. Fully equipped with all the industry standard Martin features, the MAC 700 Profile also combines a full CMY color mixing system supplemented with an 8 position color wheel and a gobo animation system for dramatic projection effects. Superior Optics A 700 Watt, double-ended lamp works together with a tremendously efficient reflector to punch out more light than you are used to seeing in a fixture this compact. Motorized Zoom and Focus A variable motorized zoom allows for full control over the beam angle of the MAC 700 Profile. Without restrictions or lens changes the fixture zooms continuously from 14 to 30 degrees. A variable focus system allows you to adjust the sharpness of your projection at any beam angle, whether you need a razor sharp image or a de-focused background effect. CMY Color-mixing A CMY color-mixing system mixes colors instantly and accurately. The system employs six coated dichroic flags providing a full spectrum of fantastic rich colors. Mechanically short distances make for extremely fast color bumps. Full Gobo Animation System A fully DMX - controlled gobo animation system - unique to a mid-sized luminaire, is specially engineered to create spectacular animated effects such as flowing water, flames or stormy skies. The system comes complete with one animation wheel, with further wheels available to expand your library. Each wheel is quickly changed via a magnetic coupling without the use of tools. Gobos Glass, textured glass or metal gobos fit within a six-position rotating and indexing gobo wheel, (plus open) and nine metal gobos make up a second static gobo wheel, (plus open). The combination of two gobo wheels easily allows for advanced morphing effects adding a huge range of graphical possibilities. The gobo system permits 16-bit control for extreme accuracy with all gobos easily interchangeable, removing any obstacle to your creativity. Dimmer / Shutter A full range dimmer/shutter is very accurate and allows for both smooth and fast intensity changes, whether it is a long fade, or a snap to blackout. In working combination as a shutter, accelerated strobe effects are possible up to 10 Hz. 8 Position Color Wheel As well as the CMY color mixing system the MAC 700 Profile features a separate color wheel with eight slots plus open. Color selections may be changed quickly and easily, offering a seemingly limitless array of color combinations. Iris and Prism A bi-directional, 3-facet prism rotates at variable speeds, adding unique effects to gobo projection. The prism can also be replaced giving lighting professionals further options for customization. A motorized iris allows you to resize the beam quickly and accurately for fast effects with smaller beam sizes. Electronic Ballast The PFC Electronic ballast provides the MAC 700 Profile with a flicker free image making it ideal for television and film work. It also allows hot lamp re-strikes and for the fixture to run in a reduced power mode; extending lamp life and further reducing its low noise output. Switch Mode Power Supply An auto-sensing power supply covers worldwide voltages and frequencies allowing the fixture to operate anywhere in the world. Quiet Operator The MAC 700 Profile contains head and base temperature sensors to ensure that fan speeds are kept to a minimum; bringing noise levels right down to suit theatre and TV studio applications. Pan & Tilt 540 degree pan and 246 degree tilt are achieved through Martin¹s outstanding pan and tilt motors which give faster-than-ever movement for a fixture of this size with noticeably less noise than other fixtures on the market. An intelligent positioning correction system automatically returns the MAC 700 Profile to its original position should it accidentally be knocked out of place while a multi position, tilt lock mechanism is also featured to permit easy maintenance and handling. Modularity An exceptionally functional modular design allows you fast and easy, tool-free access to critical components of the fixture. This reduces maintenance periods, saving time and money, and ensures that fixtures spend as much of their life as possible performing. Transportation The Martin flight case, designed for the MAC family, is recognized in the industry as one of the best purpose-built cases for the transportation of lighting fixtures. Made of durable ply, it is covered in a tough water-repellent coating for added protection. New Adaptor An ingenious, patented universal adapter allows axle friendly clamping that preserves the surface and shape of the fixtures hardware like no other can. A direct development from our hands-on approach, this is a device which whilst small, can save many hours in maintenance time and has been specified by the needs of the market. Communications The MAC 700 profile is DMX512-controllable, equipped with both 3-pin and 5-pin XLR in/out sockets, and totally compatible with coming future standards such as ACN or Ethernet-based protocol.

  • 1 Week $175.00
  • 2 Weeks $324.00
  • 4 Weeks $599.00
  • More details...

    After all is said and done, a beautifully clean even beam from center to edge is the foundation upon which everything else lies. We believe we have achieved just this in the MAC 700 Wash, creating the ideal balance between optical performance and output, giving an incredibly powerful beam of smooth uniform light. A 700 watt, double-ended, short arc lamp works in harmony with a tremendously efficient reflector and optical system to punch out more light than you are used to seeing in fixtures this compact. The 700 Wash’s brightness is truly astounding, matching and surpassing the output of higher wattage lamp sources. Soft Edge Beam The MAC 700 Wash has soft, uniform beam edges and an even light and color output. This gives a smooth distribution across projected surfaces allowing seamless overlaps of beams for large stage and set areas. Quiet Operation The MAC 700 Wash combines a clever heat management design with head and base temperature sensors to ensure that fan speeds are kept to a minimum bringing noise levels right down to suit theatre and TV studio applications. Motorized Zoom A variable motorized zoom allows for full control over the beam angle of the MAC 700 Wash. Without restrictions or lens changes, the fixture zooms continuously from a slender 12.5 to a broad 66° (tenth peak angles). Much effort has been put into ensuring that the beam maintains a smooth and even form at every step along the zoom range. Seamless CMY Color Mixing A CMY color-mixing system mixes colors instantly and accurately. The system employs six, coated dichroic flags providing a full spectrum of fantastic rich colors. Mechanically short distances make for extremely fast color bumps while the award-winning optical design of the MAC family ensures smooth, even light and color distribution. 700 W short arc discharge lamp CMY color mixing system 8 position color wheel plus open Variable CTC Motorized zoom Mechanical dimming Indexing & rotating beam shaper Rapid strobe effects (up to 10 Hz) Pan and tilt range of 540°/246° Variable fan control for quieter operation Modular design for easy maintenance and servicing Electronic ballast with hot lamp restrike and flicker free light

  • 1 Week $149.00
  • 2 Weeks $299.00
  • 4 Weeks $525.00
  • More details...

    The MAC Aura is the first compact LED moving head wash light with zoom that offers never-before-seen, eye-candy aura effects yet also functions as a highly capable single-lens wash with fully pre-mixed color. A ground-breaking optical system combines multicolor LEDs with backlight aura color mixing to produce an all new visual palette that takes the synthetic look out of LED for truly unique lighting designs.   Features Single-lens wash with fully premixed color Broad color palette, RGBW color mixing Uniform shades 11 to 58° zoom 3850 lm output Aura eye-candy effects Built-in FX engine Rapid movement High efficiency, low power consumption, long lifetime Compact, low weight design (5.6 kg)   Physical Length: 302 mm (11.9 in.) across yoke Width: 302 mm (11.9 in.) across yoke Height: 360 mm (14.2 in.), head straight up Weight: 5.6 kg (12.3 lbs.) without accessories Dynamic Effects Beam color mixing: RGBW Aura (secondary lens array illumination) color mixing: RGB Beam color temperature control: CTO, variable 10 000 - 2500 K Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined Electronic dimming: Independent beam and aura, four dimming curve options Zoom: 11° - 58° (one-tenth peak angle) Pan: 540° Tilt: 232° Pan and tilt speed: Adjustable via onboard control panel and DMX Control and Programming Control options: Independent control of beam (primary output) and aura (secondary lens array illumination) Macro programs selectable via DMX: Synchronized beam and aura effects Control: DMX RDM: Implemented Control resolution: 8-bit, with 16-bit control of pan & tilt DMX channels: 14/25 Setting and addressing: Control panel with backlit graphic display Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM Transceiver: RS-485 Fixture software update: Via DMX with Martin USB Duo DMX Interface Optics Light source: Osram Ostar high-power emitters LED refresh rate: Beam 1220 Hz, aura 4395 Hz Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Manufacturer´s figure obtained under manufacturer´s test conditions Photometric Data Total output: 3850 lumens (zoom at maximum) Construction Color: Black Housing: High-impact flame-retardant thermoplastic Protection rating: IP20 Installation Mounting points: One M12 threaded hole for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (3.9 in.) Minimum distance to illuminated surfaces: 200 mm (7.9 in.) Connections AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon DMX and RDM data in/out: 5-pin locking XLR Electrical AC power: 100-240 V nominal, 50/60 Hz Maximum total power consumption: 260 W Power supply unit: Auto-ranging electronic switch mode Main fuse: 5 AT (slow blow) Typical power consumption, all effects static, zero light output: <15 W Typical Power and Current 100 V, 60 Hz: 236 W, 2.4 A, PF 0.994 120 V, 60 Hz: 234 W, 2.0 A, PF 0.992 208 V, 60 Hz: 229 W, 1.2 A, PF 0.970 230 V, 50 Hz: 228 W, 1.1 A, PF 0.959 240 V, 50 Hz: 228 W, 1.0 A, PF 0.953 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.

  • 1 Week $219.00
  • 2 Weeks $415.00
  • 4 Weeks $719.00
  • More details...

    This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY color mixing system and crisp gobo projection on surfaces as well as mid-air. With all this and the new Animotion™ FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology. First real alternative to a 700/800 watt HID fixture Flat field, crisp image, high contrast Full feature set including CMY color mixing and 1:3 zoom Features First real alternative to a 700/800 watt HID fixture Full feature set including CMY color mixing and 1:3 zoom Super high-speed movements and effects Flat field, crisp image, high contrast Very low weight and compact design Consistent photometric performance via latest LED technology

  • 1 Week $375.00
  • 2 Weeks $725.00
  • 4 Weeks $1420.00
  • More details...

    Both flexible and efficient, the MAC Viper AirFX is a new concept that combines hard-edge, mid-air effects and a beautiful wash field in one luminaire. Featuring a great selection of all-new gobo designs, hard-edge effects remain stunning across the fixture’s entire 11 - 59° zoom range. Capable of snapping or fading into a wash light at any point, a unique and highly efficient optical system means the MAC Viper AirFX can offer the features of a profile at the output of a wash light.  The Viper AirFX has adopted the compact form, impressive speed, superior light quality and beautiful colors that the MAC Viper Profile is renowned for. It is also based on the same 1000-watt lamp for an output that convincingly exceeds any larger, heavier and more power-demanding 1500-watt profile fixture.    34500 lumens – excellent light quality 1:5 zoom - 11 to 59° continuous zoom with auto-linked focus 160 mm precision PC front lens for fat beam looks Frost - snap or fade-in for beautiful wash effect Rotating gobo wheel with 5 replaceable designs Static gobo wheel with 7 designs CMY – Vibrant color mixing with a superior palette of colors including true reds, rich ambers, primary green and deep blues 7-slot color wheel – fixed colors for added color choice Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette Dimmer and shutter - Combined dimmer/shutter system with intensity effects, instant blackout/open and smooth fades Iris – Fast and tight iris with adjustable dynamic effects Diverse strobe effect

  • 1 Week $425.00
  • 2 Weeks $810.00
  • 4 Weeks $1575.00
  • More details...

    The MAC Viper Performance is a full-feature framing fixture that delivers an output and performance never before seen in a fixture this size or one using so little power. Unlike other fixtures in this class, the MAC Viper Performance does not forgo an iris or animation wheel – they are both included along with a framing system and rotating gobos. The framing system consists of four shutter blades that can all individually adjust +/- 30° while the entire system can rotate +/- 55°. The exacting system can repeat each cue with great precision. When fully focused, gobos can be nicely framed with a soft edge. The MAC Viper Performance has adopted the compact form, impressive speed, superior light quality and beautiful colors that the MAC Viper Profile is renowned for and uses the same 1000-watt lamp. 26000 Lumens – Excellent light quality with a very flat and uniform field and 6000K color temperature 1:4 zoom – Fast zoom with auto-linked focus Four shutter blades individually adjust +/- 30° while the entire system rotates +/- 55°. Repeats cues with great precision   Features 26000 Lumens – Excellent light quality with a very flat and uniform field and 6000K color temperature Large aperture front lens – The 140 mm front lens exceeds the size of any other fixture in this segment for just the right fat beam look CMY – Vibrant color mixing with a superior palette of colors including true reds, rich ambers, primary green and deep blues Dimmer and shutter - Combined dimmer/shutter system with intensity effects, instant blackout/open and smooth fades Soft frost – A light frost leaves gobo artwork visible with a beautiful soft edge. Includes a linear focus blurring option 1:4 zoom – Fast zoom with auto-linked focus Four shutter blades individually adjust +/- 30° while the entire system rotates +/- 55°. Repeats cues with great precision 5 rotating gobos – All glass gobos with only a slight focal separation to the framing system Animation wheel with continuous bi-directional rotation 7-slot color wheel – Static colors and correction filters for added color choice and bump effects Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette Iris – Fast and tight iris with adjustable dynamic effects Strobe – Diverse strobe effects using mechanical or electronic control or in combination 4-facet prism – Real beam separation with rotation and index control for dynamic effects and accurate tiling

  • 1 Week $375.00
  • 2 Weeks $725.00
  • 4 Weeks $1420.00
  • More details...

    The MAC Viper Profile is a new breed of high-output profile luminaire with an exceptional feature set and highly efficient optical system that outperforms market-leading profiles in the 1200-watt range. Its 1000-watt HID source is convincingly brighter than 1200-watt fixtures and the MAC Viper Profile also outperforms them in terms of speed and compactness. Power consumption is lower and output is approximately 55% more efficient.   26000 lumens – Excellent light quality with a very flat and uniform field 1:5 zoom – Fast zoom with auto-linked focus Fat beam front lens – The 140 mm front lens exceeds the size of any other fixture in this segment for just the right fat beam look 5 + 5 rotating gobos – All glass gobos with optimal focal separation for superior morphing effects FX wheel – Patent-pending FX wheel provides an additional 4 fixed gobos and 135° animation effect CMY – Vibrant color mixing with a superior palette of colors including true reds, rich ambers, primary green and deep blues 8-slot color wheel – Fixed colors for added color choice Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette Dimmer and shutter – All-in-one dimmer and shutter system for instant blackout or smooth fades Iris – Fast and tight iris with adjustable dynamic effects Strobe – Diverse strobe effects using mechanical or electronic control or in combination Soft frost – A light frost leaves gobo artwork visible with a beautiful soft edge. Includes a linear focus blurring option 4-facet prism – Real beam separation with rotation and index control for dynamic effects and accurate tiling   Physical Length (Head): 566 mm (22.3 in.) Width: 472 mm (18.6 in.) Width (Base): 335 mm (13.2 in.) Height (head straight up): 731 mm (28.8 in.) Height (maximum): 748 mm (29.4 in.) Weight: 36 kg (79.4 lbs.) Lamp Approved lamp: Osram HTI 1000/PS Lok-it Type: 1000 W short-arc discharge Color temperature: 6000 K CRI (Color rendering index): >85 Average lifetime: 750 hours Socket: PGJ28 Lok-it Ballast: Electronic Dynamic Effects Color mixing: CMY, independently variable 0 - 100% Color temperature control: CTO, variable 6000 - 3200 K Color wheel: 8 interchangeable dichroic filters + open, indexing, continuous rotation, random color Aerial wheel: 5 interchangeable aerial effects + open, indexing, continuous rotation and shake Breakup wheel: 5 interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake FX wheel: Interchangeable static gobo and gobo animation effects Prism: Interchangeable 4-facet rotating prism Iris: 0 - 100%, pulse effects Frost: Frost filter Mechanical dimmer/shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout Dimming options: Choice of four dimming curves Focus: Range varies with zoom angle, from 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity (approx.) Zoom: 10° - 44° Zoom-focus linking system: 3-zone Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring Control and Programming DMX channels: 26/34 Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX 16-bit control: Aerial, breakup and texture effect rotation and indexing, focus, zoom, pan and tilt DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Receiver: Opto-isolated RS-485 Firmware update: USB memory device or USB/DMX hardware interface over DMX link Service Utilities Fixture identification: User-settable fixture ID number Construction Color(s): Black Housing: UV-resistant fiber-reinforced composite Reflector: Glass, cold light Protection rating: IP20 Installation Mounting points: Eight quarter-turn locking points Orientation: Any Minimum distance to illuminated surfaces: 1.6 m (5.2 ft.) Minimum distance to combustible materials: 0.3 m (1.0 ft.) Connections AC power input: Neutrik PowerCon DMX and RDM data in/out: 5-pin locking XLR USB memory devices: USB host socket Electrical AC power: 120-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical Power and Current 120 V, 60 Hz: 1225 W, 10.3 A, PF 0.999 208 V, 60 Hz: 1190 W, 5.8 A, PF 0.996 230 V, 50 Hz: 1186 W, 5.2 A, PF 0.994 240 V, 50 Hz: 1194 W, 5.0 A, PF 0.993 Measurements made at nominal voltage. Allow for a deviation of +/- 10%. PF = power factor Thermal Cooling: Filtered forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, Ta=40° C: 150° C (302° F) Total heat dissipation (calculated, +/- 10% at 120 V, 60 Hz): 4180 BTU/hr

  • 1 Week $65.00
  • 2 Weeks $125.00
  • 4 Weeks $245.00
  • More details...

    The MAC Viper Quadray is a never-before-seen, multiple-beam effect that adds a whole new dimension to the lighting designer toolbox. Available as an easy-to-install front lens replacement kit for any standard MAC Viper AirFX, the Quadray allows for projection of 1, 2, 3 or 4 individually-controllable rays of light for all-new static or dynamic possibilities in mid-air effects. It includes an efficient effects engine that allows designers to create a whole new variety of looks that would otherwise be hard, or even impossible, to program via a lighting console. The MAC Viper Quadray houses the same high-quality feature set as the MAC Viper AirFX, including a vibrant color mixing system and stunning aerial effects, and has inherited the same compact form, impressive speed and superior light quality from a 1000-watt lamp. Unique multi-beam effect 1, 2, 3 or 4 individually-controllable rays of light Front lens replacement kit - easy installation on any MAC Viper AirFX Easy conversion back to a standard MAC Viper AirFX Eliminates need to invest in a new fixture Narrow range zoom CMY – vibrant color mixing with a superior palette of colors including true reds, rich ambers, primary green and deep blues 7-slot color wheel – fixed colors for added color choice Rotating gobo wheel with 5 replaceable designs Static gobo wheel with 7 designs Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette Dimmer and shutter - combined dimmer/shutter system with intensity effects, instant blackout/open and smooth fades Iris – fast and tight iris with adjustable dynamic effects Diverse strobe effect

  • 1 Week $744.00
  • 2 Weeks $1413.00
  • 4 Weeks $2538.00
  • More details...

    Maxxyz is Martin’s new professional lighting console and the most advanced stage lighting console on the market today thanks to a string of highly original features and intuitive design. Maxxyz incorporates all the features that professionals should expect: fast processing power, direct fixture access, powerful effects generator, USB, motorized faders, quality touch screens, along with SMPTE/VITC/LANC/MIDI timecoding. But Maxxyz also offers programmers and LDs a string of impressive new features. Maxxyz is one of the first of its kind to incorporate digital LCD buttons designed for tailored, flexible programming. This lets you group functions to an LCD button and customize your console layout to enhance ease of navigation and fast recognition. A key element of Maxxyz is its built-in 3D Visualizer, fully integrated into the console software. The Visualizer allows you to view your light shows in highly realistic 3D. Full real-time PREVIEW allows you to create and refine your designs without interrupting the running show. Maxxyz has been developed with multimedia in mind. The console has a DVD/CD-RW multi-drive so you can synchronize your light shows with audio and video. The combination drive also lets you save your shows to CD-ROM, or you can use it to watch your favorite DVDs during those idle moments. Maxxyz also has a further 39 GB of space available for backup purposes. Along with the 8 DMX universes available directly from the console, Maxxyz is also fully Ethernet enabled. By connecting to a series of EtherDMX boxes, Maxxyz’ capacity expands to 32 DMX universes or up to 32,768 channels. The fast Ethernet network lets you connect to the console from a remote location via PC or laptop. You can also connect to the Internet for software updates, service and support, or to make remote programming modifications from anywhere in the world. Inside the console are two 1.2 GHz, Pentium III processors, two complete computer systems that run in tandem and operate as one large, integrated system. If one CPU fails, the other will act as backup to preserve the core functions of the console during a show. Integrated 3D Visualizer: preview or program in real-time 3D. DVD/CD/CD-R drive. Digital LCD buttons for fast and direct programming. Remote capabilities: via Ethernet or Internet from a laptop or other console. Multiple wing attachment. Built-in intercom station and headset. Up to 32 DMX universes, 8 available directly from the console. Motorized faders. Dual processing power, 2 x 1.2 GHz Pentium III CPUs.

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    Specially formulated for the range of hazers including ZR 24/7 and Magnum Hazer, this fluid is also ideal for use with the Roadie X-Stream when in Haze mode. A fine optically transparent airborne medium is produced with a light to medium index of refraction - ideal for beam projection.

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    Specially formulated for the range of hazers including ZR 24/7 and Magnum Hazer, this fluid is also ideal for use with the Roadie X-Stream when in Haze mode. A fine optically transparent airborne medium is produced with a light to medium index of refraction - ideal for beam projection.

  • 1 Week $44.00
  • 2 Weeks $83.00
  • 4 Weeks $149.00
  • More details...

    A highly anticipated update to the FiberSource QFX 150, the new RUSH FiberSource 1 is a powerful tool for illuminating fiber optic cables in permanent installations. With a new 78 W LED fiber projector, the RUSH FiberSource 1 boasts improved efficiency and reliability while retaining all the key features of its predecessor, such as nine interchangeable colors, a twinkle effects wheel, electronic dimming and DMX/stand-alone control. 78 W LED fiber projector 9 interchangeable colors 0-100% electronic intensity control Features 78 W LED fiber projector 9 interchangeable colors 0-100% electronic intensity control Twinkle effect wheel DMX or stand-alone control Up to 300 fiber cables (1 mm) Tech Specs    Physical Length: 305 mm (12.0 in.) Width: 210 mm (8.3 in.) Height: 200 mm (7.9 in.) Weight: 7.6 kg (16.8 lbs.) Dynamic Effects Color wheel: 9 interchangeable filters + open, indexing, continuous rotation Twinkle effect: Continuous rotation, variable speed and direction Dimmer: 0 - 100% continuous dimming Control and Programming Control options: DMX, standalone, master/slave DMX channels: 5 Standalone programming: DIP switch Settings and DMX addressing: DIP switch DMX compliance: USITT DMX512/1990 OpticsLight source: CREE 78 W LEDColor temperature: 6000–7000 KCRI (color rendering index): >70 Minimum LED lifetime: 35 000 hours (to >70% luminous output)**Figure obtained under test conditions Construction Color: Black (RAL 9005) Housing: Steel and aluminum Protection rating: IP20 Installation Mounting points: Four rubber-mounting grommets, two Ø13 mm holes for rigging clamps Location: Indoor use only, must be fastened to surface or structure Minimum distance to combustible materials: 0.2 m (7.9 in.) Minimum clearance around fans and vents: 0.1 m (4.0 in.) Orientation: Any Connections AC power in/out: Neutrik PowerConDMX data in/out: 3-pin and 5-pin locking XLR Electrical AC power: 100-240 V, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical Power and Current 110 V, 60 Hz: 0.8 A, 87 W, PF 0.986230 V, 50 Hz: 0.5 A, 86 W, PF 0.909 Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Thermal Cooling: Forced air (regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 50º C (122° F)

  • 1 Week $119.00
  • 2 Weeks $213.00
  • 4 Weeks $406.00
  • More details...

    This super bright LED profile moving head is even brighter than its predecessor RUSH MH 1 Profile with  50% more output. Efficient optics with an increased beam angle from 13 degrees to 16 degrees punches out a variety of effects and colors from two gobo wheels and two color wheels. For added versatility and effect, it also houses an electronic dimmer and strobe, iris and 3-facet prism and an improved cooling system for quieter operation. 50 % increase in lumen output 16 degree beam angle Regulated fan control for quiet operation   Features LED profile moving head Super bright - efficient optics Rotating gobo wheel Fixed gobo wheel 2 x color wheels Electronic dimming and strobe Iris and 3-facet prism 3 & 5 pin XLR

  • 1 Week $90.00
  • 2 Weeks $170.00
  • 4 Weeks $305.00
  • More details...

    The new Stagebar 54 is a compact, powerful LED luminaire with a comprehensive color range, all-in-one simplicity and a tough temperament for the touring market. It functions as a pixel bar for displaying imagery and video or as a wash luminaire for floodlighting surfaces and stages. • Luxeon K2 high-power LEDs • 116 watts total LED output per fixture at 25° C (77° F) • RGBAW (red, green, blue, amber, white), and RGB color mixing, HSIC (hue, saturation, intensity, color temperature) and HSI color management • 54 LEDs arranged into 6 pixels per fixture • Individual (6 x 1) or grouped (1 x 6, 2 x 3 or 3 x 2) pixel control • Diffuser front for even color rendition • 25° viewing angle • DMX 512A control (3 - 30 channels depending on control mode) • Control data in/out via RJ-45 connectors • Control panel and full text backlit LCD display with battery power for offline setting and addressing • Auto-sensing power supply unit with 100 - 240 V, 50/60 Hz operating range • Daisy-chainable power link • Power in/out via Neutrik® PowerCon® connectors • Adjustable floorstand/mounting bracket • Quarter-turn fastener mounting point

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    A four lane (x4) PCI Express board for capture from uncompressed 8-bit and 10-bit HD-SDI and standard definition SDI cameras. A high performance board with multi channel capability allowing simultaneous capture from two independent HD-SDI or SDI cameras. Supports 525 NTSC, 625 PAL, 720p and 1080i; SMTPE 292M, SMPTE 344M, and SMPTE 259M.